BMW 3 Series F30 F31 Ikon Style U-Bar LED Headlights (2012–2018)
The Ikon Front End
Every F30 owner has looked at their front end and known it could be more. The factory headlight was engineered for compliance — designed to meet a specification and disappear into the body line. This kit was engineered for the opposite reason entirely.
The GlobalPace Ikon headlight kit is one of the most complete front end transformations available for the 2012–2018 BMW 3 Series F30 Sedan and F31 Wagon. Black housing. Dual projector architecture. Your choice of clear or smoked lens, and a DRL system from single white up to tri-color — switched from the factory high-beam stalk with zero extra hardware, zero coding and zero modifications.
Ships within 1–3 business days while stock lasts.
What This Kit Is — And What It Replaces
A direct replacement for the complete headlight assemblies on the 2012–2018 BMW 3 Series F30 Sedan and F31 Wagon — the full units that deliver low beam, high beam, DRL and turn signal. Both sides are replaced. Same mounting points, same connectors, zero modification to the factory harness or body.
The U-Bar Angel Eye DRL Architecture
Bold U-shaped angel eye DRL rings frame each dual projector bowl on every kit — the only difference between versions is the DRL colors. In standby the rings read as dark, precise geometric forms against the black housing interior; on activation they fire across both housings at once in your chosen color, cutting through the lens at full saturation.
Engineered for the F30 sedan and F31 wagon only. It does not fit the F32 Coupe, F33 Convertible, F34 Gran Turismo, F80 M3 or F82 M4.
What You Get
Your choice of DRL system
Single white, dual white/yellow, or tri-color — colors switch from the factory high-beam stalk with zero extra hardware.
U-bar angel eye rings
Bold U-shaped DRL rings frame each projector bowl on every kit.
Clear or smoked lens
Clear for full display, or a deep smoked tint for a blacked-out look.
Dual projector architecture
Two focused projectors per housing for precise low and high beam.
Progressive startup animation
Sweeps the full DRL architecture on every ignition cycle.
Halogen & xenon versions
Pick the connector that matches your factory headlights — send us your VIN if unsure.
Pre-LCI and LCI coverage
Fits the full 2012–2018 F30 / F31 production run.
Direct replacement
Zero drilling, cutting or harness modification. Left and right assemblies in one box.
Built to last · 1-year warranty
100% waterproof sealed ABS/PC/PMMA construction, every unit inspected before dispatch, backed by GlobalPace.
Every Function
| Daytime running / DRL | 6,000LM at 36W 6000K in the color mode(s) of your selected DRL system, switched from the factory high-beam stalk. |
| Turn signal | Static amber flash on every indication. |
| Low beam | Dual projector focused output for precise road illumination. |
| High beam | Full dual projector output for maximum visibility at distance. |
| Startup animation | Progressive sweep across the DRL on every ignition cycle, settling into your chosen color. |
Spec Sheet
| Output | 6,000 lumens · 36W · 6000K |
| Housing | Black interior · dual projector architecture |
| Construction | ABS / PC / PMMA tri-layer · 100% waterproof sealed |
| Turn signal | Static amber (not sequential) |
| Certification | E-Mark · RoHS |
| Warranty | 1 year, backed by GlobalPace |
| Approx. weight | ~20 lbs (pair, boxed) |
| Approx. box size | 24 × 22 × 8 in |
Will It Fit My Car?
| Year | Make | Model | Body style | Chassis |
|---|---|---|---|---|
| 2012–2018 | BMW | 320i / 320i xDrive | Sedan | F30 |
| 2012–2018 | BMW | 328i / 328i xDrive | Sedan | F30 |
| 2014–2018 | BMW | 328d / 328d xDrive | Sedan | F30 |
| 2016–2018 | BMW | 330i / 330i xDrive | Sedan | F30 |
| 2012–2015 | BMW | 335i / 335i xDrive | Sedan | F30 |
| 2016–2018 | BMW | 340i / 340i xDrive | Sedan | F30 |
| 2014–2016 | BMW | ActiveHybrid 3 | Sedan | F30 |
| 2014–2018 | BMW | 328i xDrive Sports Wagon | Wagon | F31 |
| 2014–2018 | BMW | 328d xDrive Sports Wagon | Wagon | F31 |
| 2016–2018 | BMW | 330i xDrive Sports Wagon | Wagon | F31 |
Does not fit: F32 Coupe · F33 Convertible · F34 Gran Turismo · F80 M3 · F82 M4 · Any 2-door body style
Install Steps
- Disconnect the negative battery terminal and wait 60 seconds before working on the lighting circuit.
- Open the hood and locate the headlight retaining bolts and clips. Remove any front fascia trim clips needed for access on your body style.
- Disconnect the factory harness connectors — low beam, high beam, DRL and turn signal — pressing each release tab firmly before pulling.
- Remove the OEM assembly and test-fit the new headlight. Reconnect the harness and temporarily reconnect the battery to check every function — DRL and color switching, low beam, high beam, turn signal and startup animation — before securing any hardware.
- Once everything is confirmed, secure all mounting hardware to factory torque spec and reconnect the battery for a final check.
- Professional installation by a licensed automotive technician is strongly recommended if you're not comfortable working on vehicle electrical systems.
What's Included
- Left headlight assembly
- Right headlight assembly
- Mounting hardware
Ships within 1–3 business days while stock lasts. Backed by GlobalPace's 1-year manufacturer warranty, and every unit is individually inspected before dispatch. Contact us before starting any return — most installation questions are solved in one message.
OEM Part Numbers Replaced
Right / Passenger — 63117338710
Partslink — BM2502169 · BM2503169
Right / Passenger — 63117338708
Partslink — BM2502181 · BM2503181
Also supersedes: 63117259549 · 63117259550
Questions, Answered
Which connector do I need?
If your current headlights have a visible auto-leveling motor inside the housing and a sharp bright white beam, you have xenon. If your DRL is a softer yellowy-white bulb output, you have halogen. This kit isn't offered for cars with factory LED headlights. Not sure? Send us your VIN and we'll confirm before you order.
How do I switch DRL colors?
With the factory high-beam stalk — no apps, coding or extra hardware. 5 flashes for white, 6 for yellow, and 7 for the third color on tri-color kits. The color holds until you switch it again.
Do I need BimmerCode to switch colors?
No. Color switching works entirely through the high-beam stalk. BimmerCode is only an optional way to clear a check control message, not to enable any headlight function.
Are the colored DRL modes street legal?
Use white DRL mode on public roads. Yellow and amber DRL legality varies by state, so check your local regulations. Red DRL mode is for off-road and show use only — red forward-facing lights are not legal on public roads in the US.
Does this fit Pre-LCI and LCI cars?
Yes — it covers Pre-LCI 2012–2015 and LCI 2016–2018 F30 and F31. Choose the connector that matches your factory headlights.
Does this fit the F32, F80 M3 or F82 M4?
No. It's engineered for the F30 sedan and F31 wagon only and doesn't fit the F32 Coupe, F33 Convertible, F34 Gran Turismo, F80 M3 or F82 M4.
Is this plug and play?
Yes — a direct replacement with zero drilling, cutting or harness modification, as long as you select the right connector. Professional installation is recommended.
Is there a sequential turn signal?
No. The turn signal is a static amber flash. The startup animation sweeps across the DRL on ignition.
Will this trigger a check control message?
On some F30 builds a check control warning may appear — it's cleared in minutes with BimmerCode or any BMW-compatible OBDII tool, and no headlight function is affected. Contact us before starting any return and we'll walk you through it.
What if I have an issue after installation?
Contact us before starting any return. The large majority of installation questions are resolved in a single message exchange.